Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Technical requirements for the use of Gray board compound machine

Date:2020-12-15
Info:
 The gray board compound machine mainly uses PLC as the control center of the whole system to realiz

  The gray board compound machine mainly uses PLC as the control center of the whole system to realize the operation of the whole process. The PLC controls the pneumatic components by the pulse output of the specific pulse output port, which makes the LCD alternately rotate the platform to move to the specified position in the circular direction according to the predetermined position. The adhesive (glue) is evenly applied to the composite substrate by the roller, and then the composite substrate on the other side is overlapped, and the adhesive (glue) is dried through the composite drying wheel to complete the composite process.

Composite Machine

  Technical requirements for the use of Gray board compound machine

  1. When using the initial strip, the tension should be adjusted to a suitable position, that is, not loose or tight. When the strip is found to be contracted, adjust the tension device in time to relax the tension adjustment.

  2. During the operation, the strip should not be deflected at all times. In case of deviation, it must be adjusted in time. Pay attention to each adjustment range can not be too large, too large will stretch the strip deformation, different specifications of cardboard deviation is not the same.

  3. In order to prevent the strip and paperboard from staying on the hot plate during shutdown, it is necessary to support the strip and paperboard away from the hot plate surface after shutdown, so as to prevent the strip surface from being damaged by coking.

  4. It is necessary to check the fixed length of both sides of the plate and belt hook to prevent the hook from running out.

  5. The surface of the strip must be kept clean, so that the air permeability of the strip is not affected and the quality of the paperboard is guaranteed.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Technical requirements for the use of Gray board compound machine

  The gray board compound machine mainly uses PLC as the control center of the whole system to realize the operation of the whole process. The PLC controls the pneumatic components by the pulse output of the specific pulse output port, which makes the LCD alternately rotate the platform to move to the specified position in the circular direction according to the predetermined position. The adhesive (glue) is evenly applied to the composite substrate by the roller, and then the composite substrate on the other side is overlapped, and the adhesive (glue) is dried through the composite drying wheel to complete the composite process.

Composite Machine

  Technical requirements for the use of Gray board compound machine

  1. When using the initial strip, the tension should be adjusted to a suitable position, that is, not loose or tight. When the strip is found to be contracted, adjust the tension device in time to relax the tension adjustment.

  2. During the operation, the strip should not be deflected at all times. In case of deviation, it must be adjusted in time. Pay attention to each adjustment range can not be too large, too large will stretch the strip deformation, different specifications of cardboard deviation is not the same.

  3. In order to prevent the strip and paperboard from staying on the hot plate during shutdown, it is necessary to support the strip and paperboard away from the hot plate surface after shutdown, so as to prevent the strip surface from being damaged by coking.

  4. It is necessary to check the fixed length of both sides of the plate and belt hook to prevent the hook from running out.

  5. The surface of the strip must be kept clean, so that the air permeability of the strip is not affected and the quality of the paperboard is guaranteed.



Dongguan Chuanbo Machinery Equipment Co., Ltd.