Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Workflow of web paper mounting machine

Date:2020-12-21
Info:
 Operators should pay attention to adjust the pressure of pit paper and cot when working on the pape

  Operators should pay attention to adjust the pressure of pit paper and cot when working on the paper mounting machine, so as to avoid deformation of pit paper and machine damage. In addition, when adjusting the glue output, it is forbidden to start without glue or without water, so as to avoid friction damage of cots. If the laminating machine breaks down, please inform the maintenance personnel immediately. Do not disassemble the machine and circuit without permission. Paper mounting machine is an important packaging paper production equipment. In order to improve production efficiency and effectively control product quality, reasonable and standardized operation should be carried out.

Composite Machine

  The working process of web paper mounting machine is as follows:

  1. Close the power switch and prepare the materials according to the packing carton production instruction sheet.

  2. After checking whether the viscosity of the glue is qualified, pour it into the water tank of the paper mounting machine, and adjust the amount of glue application according to the requirements. Before mounting the paper, the viscosity of the glue must be checked. If it is overdue or invalid, it must be reported and handled. The size of the glue coating amount should be adjusted appropriately. Excessive humidity and too small will cause degumming.

  3. Place the pit paper and colored paper to be mounted, and the pit direction of the pit paper should be opposite to the paper grain of the colored paper. Adjust the pressure of cot and pit paper according to the thickness of pit paper.

  4. Start the main machine button of the mounting machine to adjust the glue output. One operator feeds paper at the machine mouth and two operators mount them under the machine.

  5. Mount one sheet first, pay attention to whether the mounting needle position is correct, whether it meets the customer requirements, and check whether it meets the quality requirements, and then batch production.

  6. After mounting, pull it to the suction fan for dehumidification, and close the main machine button of the mounting machine to complete the operation.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Workflow of web paper mounting machine

  Operators should pay attention to adjust the pressure of pit paper and cot when working on the paper mounting machine, so as to avoid deformation of pit paper and machine damage. In addition, when adjusting the glue output, it is forbidden to start without glue or without water, so as to avoid friction damage of cots. If the laminating machine breaks down, please inform the maintenance personnel immediately. Do not disassemble the machine and circuit without permission. Paper mounting machine is an important packaging paper production equipment. In order to improve production efficiency and effectively control product quality, reasonable and standardized operation should be carried out.

Composite Machine

  The working process of web paper mounting machine is as follows:

  1. Close the power switch and prepare the materials according to the packing carton production instruction sheet.

  2. After checking whether the viscosity of the glue is qualified, pour it into the water tank of the paper mounting machine, and adjust the amount of glue application according to the requirements. Before mounting the paper, the viscosity of the glue must be checked. If it is overdue or invalid, it must be reported and handled. The size of the glue coating amount should be adjusted appropriately. Excessive humidity and too small will cause degumming.

  3. Place the pit paper and colored paper to be mounted, and the pit direction of the pit paper should be opposite to the paper grain of the colored paper. Adjust the pressure of cot and pit paper according to the thickness of pit paper.

  4. Start the main machine button of the mounting machine to adjust the glue output. One operator feeds paper at the machine mouth and two operators mount them under the machine.

  5. Mount one sheet first, pay attention to whether the mounting needle position is correct, whether it meets the customer requirements, and check whether it meets the quality requirements, and then batch production.

  6. After mounting, pull it to the suction fan for dehumidification, and close the main machine button of the mounting machine to complete the operation.



Dongguan Chuanbo Machinery Equipment Co., Ltd.