Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

The core part of paper mounting machine system

Date:2020-12-30
Info:
 The paper mounting machine system is composed of paper feeding mechanism, paper transmission mechan

  The paper mounting machine system is composed of paper feeding mechanism, paper transmission mechanism, paper mounting mechanism and paper pressing mechanism. It adopts mechanical transmission mode, which inevitably leads to positioning chain wear, positioning claw wear, positioning claw driving sprocket wear and other running wear. The wear of any part will affect the bonding accuracy and gluing quality of the whole paper mounting machine through gear or chain Uniformity. The face paper, base paper and gluing are the core parts of the mounting machine system.

Composite Machine

  The motors of the paper pressing part and the paper feeding part of the paper mounting machine should be replaced with high-speed grease once every six months. The staff should often check the tightness and wear of the belt of the paper mounting machine, so as to keep the suction nozzle of the paper mounting machine moving freely up and down, and pay attention to the internal cleaning of the suction nozzle.

  Secondly, the surface of all rollers should be kept clean at all times to avoid solid objects attached to them. In addition, attention should be paid to the sudden expansion of COTS due to chemical solvent during operation, so as to prevent the appearance burst of COTS due to long-term extrusion. When the work is finished, the coating and cots must be back pressed together before off duty to prevent the cots from being squeezed for a long time and causing elastic fatigue, which will affect the service life of the paper mounting machine.

  Before mounting, we should carefully observe the appearance quality of the corrugated board, such as whether the edge of the corrugated board is rough and cracked, whether there is collapse, flat edge and warping deformation of the board. If our corrugated board has similar problems, we should immediately carry out relevant detection to prevent more losses.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

The core part of paper mounting machine system

  The paper mounting machine system is composed of paper feeding mechanism, paper transmission mechanism, paper mounting mechanism and paper pressing mechanism. It adopts mechanical transmission mode, which inevitably leads to positioning chain wear, positioning claw wear, positioning claw driving sprocket wear and other running wear. The wear of any part will affect the bonding accuracy and gluing quality of the whole paper mounting machine through gear or chain Uniformity. The face paper, base paper and gluing are the core parts of the mounting machine system.

Composite Machine

  The motors of the paper pressing part and the paper feeding part of the paper mounting machine should be replaced with high-speed grease once every six months. The staff should often check the tightness and wear of the belt of the paper mounting machine, so as to keep the suction nozzle of the paper mounting machine moving freely up and down, and pay attention to the internal cleaning of the suction nozzle.

  Secondly, the surface of all rollers should be kept clean at all times to avoid solid objects attached to them. In addition, attention should be paid to the sudden expansion of COTS due to chemical solvent during operation, so as to prevent the appearance burst of COTS due to long-term extrusion. When the work is finished, the coating and cots must be back pressed together before off duty to prevent the cots from being squeezed for a long time and causing elastic fatigue, which will affect the service life of the paper mounting machine.

  Before mounting, we should carefully observe the appearance quality of the corrugated board, such as whether the edge of the corrugated board is rough and cracked, whether there is collapse, flat edge and warping deformation of the board. If our corrugated board has similar problems, we should immediately carry out relevant detection to prevent more losses.



Dongguan Chuanbo Machinery Equipment Co., Ltd.