Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Requirements of special paper Composite Machine on working environment

Date:2021-02-25
Info:
 After the start-up and operation of the special paper Composite Machine, the main operator should o

  After the start-up and operation of the special paper Composite Machine, the main operator should observe the operation of the laminating machine, and reasonably adjust the paper roller tension, film roller tension and composite pressure according to the size change of paper roll and film roll unwinding.

Composite Machine

  During the operation, the main operator of the Composite Machine slowly adjusts the speed control knob of the torque motor controller to 1200 (R / min) according to the change of winding size, and the Composite Machine enters into high-speed operation. When the wrinkling occurs on the composite film during the compound operation, the main cause of the wrinkle should be judged immediately according to the actual situation, whether it comes from the paper or from the film, and then make reasonable adjustment immediately.

  Requirements of special paper Composite Machine on working environment

  First of all, make sure that the compound machine works in a clean environment and keep the compound machine away from dust as far as possible. At the same time, it should be ensured that the working environment of the compound machine should be relatively dry, not too wet, because of the oxidation equipment, and can not place too heavy items on it, so as to avoid crushing the parts of the compound machine.

  In addition, pay attention not to place small metal objects such as paper clips around the Composite Machine, so as to prevent them from falling into the compound machine. Once they fall into the compound machine, the internal parts inside the compound machine will be scratched, and more seriously, the electronic components in the equipment will be short circuited, thus damaging the Composite Machine.



E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Requirements of special paper Composite Machine on working environment

  After the start-up and operation of the special paper Composite Machine, the main operator should observe the operation of the laminating machine, and reasonably adjust the paper roller tension, film roller tension and composite pressure according to the size change of paper roll and film roll unwinding.

Composite Machine

  During the operation, the main operator of the Composite Machine slowly adjusts the speed control knob of the torque motor controller to 1200 (R / min) according to the change of winding size, and the Composite Machine enters into high-speed operation. When the wrinkling occurs on the composite film during the compound operation, the main cause of the wrinkle should be judged immediately according to the actual situation, whether it comes from the paper or from the film, and then make reasonable adjustment immediately.

  Requirements of special paper Composite Machine on working environment

  First of all, make sure that the compound machine works in a clean environment and keep the compound machine away from dust as far as possible. At the same time, it should be ensured that the working environment of the compound machine should be relatively dry, not too wet, because of the oxidation equipment, and can not place too heavy items on it, so as to avoid crushing the parts of the compound machine.

  In addition, pay attention not to place small metal objects such as paper clips around the Composite Machine, so as to prevent them from falling into the compound machine. Once they fall into the compound machine, the internal parts inside the compound machine will be scratched, and more seriously, the electronic components in the equipment will be short circuited, thus damaging the Composite Machine.




Dongguan Chuanbo Machinery Equipment Co., Ltd.