Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Process steps of Web paper composite machine

Date:2021-03-16
Info:
 Web paper composite machine can be used for coating and laminating of cellophane, aluminum foil, ny

  Web paper composite machine can be used for coating and laminating of cellophane, aluminum foil, nylon, paper pet, OPP, BOPP, CPP, NY, PE, etc. in the daily production process of Web paper composite machine, operators often wear safety gloves, goggles and long sleeve work clothes to prevent their bodies from being scalded by high temperature liquid hot melt adhesive or high temperature parts surface.

Composite Machine

  Process steps of Web paper composite machine

  1. Install the base material guide roller according to the routing direction, and adjust the adhesive in proportion at the same time;

  2 start the heating system of the oven. When the corresponding set temperature is reached, turn on the drive motor and start the coating production.

  Three. The base material of the unwinding equipment should pass through the anilox roller first, and then finish the coating process through the drying tank.

  4epc enters the composite after gas-liquid distillation and completes the composite process with the base metal of the second unwinding part.

  In the production process of Web paper composite machine, attention should be paid to the control of tension. Tension control is one of the most important conditions in the compound process. If the tension is not properly controlled, the composite paper will wrinkle or curl, leading to a series of problems, such as wrinkle of printed matter, silver leakage, difficult matching of overprint electronic version, high defective product rate and so on.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Process steps of Web paper composite machine

  Web paper composite machine can be used for coating and laminating of cellophane, aluminum foil, nylon, paper pet, OPP, BOPP, CPP, NY, PE, etc. in the daily production process of Web paper composite machine, operators often wear safety gloves, goggles and long sleeve work clothes to prevent their bodies from being scalded by high temperature liquid hot melt adhesive or high temperature parts surface.

Composite Machine

  Process steps of Web paper composite machine

  1. Install the base material guide roller according to the routing direction, and adjust the adhesive in proportion at the same time;

  2 start the heating system of the oven. When the corresponding set temperature is reached, turn on the drive motor and start the coating production.

  Three. The base material of the unwinding equipment should pass through the anilox roller first, and then finish the coating process through the drying tank.

  4epc enters the composite after gas-liquid distillation and completes the composite process with the base metal of the second unwinding part.

  In the production process of Web paper composite machine, attention should be paid to the control of tension. Tension control is one of the most important conditions in the compound process. If the tension is not properly controlled, the composite paper will wrinkle or curl, leading to a series of problems, such as wrinkle of printed matter, silver leakage, difficult matching of overprint electronic version, high defective product rate and so on.



Dongguan Chuanbo Machinery Equipment Co., Ltd.