Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Structure and maintenance of corrugating roller of Composite Machine

Date:2021-03-22
Info:
 Corrugating roller is one of the most important parts of all the paper making equipment. The corrug

  Corrugating roller is one of the most important parts of all the paper making equipment. The corrugating roller of Web laminating machine is divided into upper corrugating roll and lower corrugating roller. The upper and lower roller surfaces are female. The two rollers are matched and meshed, and the meshing mechanism is different from the gear transmission. The lower corrugating roller is the driving roller, and the shaft end is equipped with gears. The motor drives the lower corrugating roller to rotate through the reducer. The upper and lower toothed rollers are driven by each other.

Composite Machine

  Maintenance of corrugating roller of Composite Machine

  The pressure between the corrugating roller and the corrugating roller can be controlled by adjusting the pressure between the corrugating roller and the corrugating roller.

  The wear of corrugating roller is linear, so it is necessary to check the corrugating height regularly to accurately infer the expected life and replacement date of corrugating roller, so as to ensure the quality of production.

  The middle part of the corrugating roller is most worn. This results in uneven pressure on the nip of the pressure roll and it is difficult to apply glue evenly. A small amount (0.05mm) of material can be ground with diamond grinding paste or from the edge of the journal. However, this operation is very difficult and requires high skill to avoid grinding off the important coating on the ridge. Corrugating roller with serious wear should be replaced in time.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Structure and maintenance of corrugating roller of Composite Machine

  Corrugating roller is one of the most important parts of all the paper making equipment. The corrugating roller of Web laminating machine is divided into upper corrugating roll and lower corrugating roller. The upper and lower roller surfaces are female. The two rollers are matched and meshed, and the meshing mechanism is different from the gear transmission. The lower corrugating roller is the driving roller, and the shaft end is equipped with gears. The motor drives the lower corrugating roller to rotate through the reducer. The upper and lower toothed rollers are driven by each other.

Composite Machine

  Maintenance of corrugating roller of Composite Machine

  The pressure between the corrugating roller and the corrugating roller can be controlled by adjusting the pressure between the corrugating roller and the corrugating roller.

  The wear of corrugating roller is linear, so it is necessary to check the corrugating height regularly to accurately infer the expected life and replacement date of corrugating roller, so as to ensure the quality of production.

  The middle part of the corrugating roller is most worn. This results in uneven pressure on the nip of the pressure roll and it is difficult to apply glue evenly. A small amount (0.05mm) of material can be ground with diamond grinding paste or from the edge of the journal. However, this operation is very difficult and requires high skill to avoid grinding off the important coating on the ridge. Corrugating roller with serious wear should be replaced in time.



Dongguan Chuanbo Machinery Equipment Co., Ltd.