Mobile Phone

+86-137 1193 0133

Call Us

+86-769-8873 4319

E-mail

cb@zgchuanbo.com
Contact Us

Address:North Square Road, Gaobu Town, Dongguan
Phone:+86-13711930133
Tel:+86-769-88734319

Industry News
Position: Home / News / Industry News

Production process of Composite Machine and problems needing attention in production

Date:2021-04-27
Info:
   Composite Machine can be used for coating compound of OPP, BOPP, CPP, NY, PE and other drum based

  

  Composite Machine can be used for coating compound of OPP, BOPP, CPP, NY, PE and other drum based equipment. Install the base plate along each guide roller, place the adhesive in proportion, start the oven heating system, turn on the electric motor again after reaching the corresponding set temperature, and then start the coating production. The recording of the rolling device should first go through the anilox roller, apply with adhesive, and then finish the coating process through the dryness. After EPC gas-liquid correction, it enters the composite part, and combines with the substrate of the second roll part to realize the composite process.

Composite Machine

  Pay attention to the following problems in production

  1. Adjust the position of the offset roller and the flatness of the base plate.

  2. Adjust the relative distance between the two compound rolls and the compound pressure between the compound rolls.

  3. Adjust the tension of clutch and brake, adjust the traction of equipment and the tension of reel to make the machine run smoothly and achieve the quality and composite effect of rabbit cloth.


E-mail

cb@zgchuanbo.com

Phone

+86-13711930133

address

North Square Road,
Gaobu Town, Dongguan

WORKING TIME

08:30~17:30 Monday
to Saturday

Copyright © 2020 Dongguan Chuanbo Machinery Equipment Co., Ltd.
Home / News / Industry News

Production process of Composite Machine and problems needing attention in production

  

  Composite Machine can be used for coating compound of OPP, BOPP, CPP, NY, PE and other drum based equipment. Install the base plate along each guide roller, place the adhesive in proportion, start the oven heating system, turn on the electric motor again after reaching the corresponding set temperature, and then start the coating production. The recording of the rolling device should first go through the anilox roller, apply with adhesive, and then finish the coating process through the dryness. After EPC gas-liquid correction, it enters the composite part, and combines with the substrate of the second roll part to realize the composite process.

Composite Machine

  Pay attention to the following problems in production

  1. Adjust the position of the offset roller and the flatness of the base plate.

  2. Adjust the relative distance between the two compound rolls and the compound pressure between the compound rolls.

  3. Adjust the tension of clutch and brake, adjust the traction of equipment and the tension of reel to make the machine run smoothly and achieve the quality and composite effect of rabbit cloth.



Dongguan Chuanbo Machinery Equipment Co., Ltd.